HENSOTHERM® 2C Fire protection system for steel

HENSOTHERM® 2C Fire protection system for steel

epoxy fire retardant coatings

Brend: HENSEL

The HENSOTHERM® 2C fire protection systems consisting of HENSOTHERM® 910 KS and the newly-formulated HENSOTHERM® 920 KS are 100% solvent-free, two-component epoxy fire protection coatings for strengthening steel profiles and steel structures both indoors and outdoors. The systems impress with their fire resistance times of 30/60/90/120 minutes, the beneficial working properties such as the optimally-adjusted, longer shelf life, the thin layer thicknesses and an achievable corrosivity category of up to C5 High in the system. They can also be used on galvanised components. Bearing in mind the expected environmental requirements, some of the fire protection coatings can also be used without primer and topcoat.

Quickly coated, loaded and assembled
HENSOTHERM® 2C fire protection systems are applied in the workshop and are already optimally protected against mechanical stress and the weather after 24 hours drying time. This means that steel elements that have already been coated can be stored outdoors and/or transported directly to the site of use and installed there so as to save time.

920KS

 

HENSOTHERM® 920 KS | R30 – R120
The all-rounder

The new 2-component fire protection system is solvent-free, tested in accordance with AgBB test criteria for VOC emissions from interior-relevant building products and covers fire resistance times of 30/60/90/120 minutes. Therefore, no system change is necessary during coating, and the resulting make-ready times are eliminated. Corrosivity classes of up to C5 High are possible in the system. The optimally adjusted, longer shelf life also allows working with suitable 1-component systems.

 

2K Brandschutz

 

HENSOTHERM® 910 KS | R30 – R60
The well-proven system

100% solvent free Non-VOC. Free of halogens, alkyl phenol and benzyl alcohol. AgBB-tested and listed in the Cologne List, which means that it can be applied without restrictions and is very suitable for sustainable building in accordance with DGNB specifications.

 

Grüner Brandschutz

 

Products for ecological construction
Sustainable and environmentally friendly

Hensel Green Products – our fire protection coating systems form part of the construction materials for ecological construction and so our focus is always on sustainability and environmental compatibility.

 

2K MiQua

 

The Museum in the district
2C fire protection for steel structures

HENSOTHERM® 2C fire protection systems are applied in the workshop and are already protected against mechanical stress and the weather after 24 hours drying time. This means that transport to the site is possible at short notice, so that it can be installed there directly and without losing time.